{"title":"Matthews C-Stands","description":"\u003cp\u003eShop the Matthews C-Stands range.\u003c\/p\u003e","products":[{"product_id":"756120","title":"Matthews 50.8cm (20\") C+ Stand with Turtle Base, Grip Head \u0026 Arm (Chrome)","description":"\u003cp\u003eThe 50.8cm (20\") C+ Stand is the short Matthews C-stand with the detachable spring loaded turtle base, here as a full kit with grip head and 50.8cm (20\") Hollywood arm in chrome. It is the stand for tight sets, low setups and small packages, where a 101.6cm (40\") riser would just get in the way.\u003c\/p\u003e\n\u003cp\u003ePull the riser out of the turtle base and the base becomes a low stand on its own, around 30cm (12\") high with a junior receiver for grip hardware and lighting. The legs nest with other C-stands, and the sliding lower leg levels the stand on stairs, kerbs and slopes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable spring loaded turtle base with a 2.86cm (1-1\/8\") junior receiver\u003c\/li\u003e\n\u003cli\u003eDetachable double riser with a junior pin at one end and a baby pin at the other\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e83.3cm (32.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6kg (13lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTurtle base mounting height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 30cm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eEmail sales@blkflag.com.au if you need the maximum working height confirmed before you order.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe riser, turtle base, grip head and arm are all sold separately as spares, and the turtle base takes any standard C+ riser or anything with a junior pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") C+ double riser\u003c\/li\u003e\n\u003cli\u003eSpring loaded turtle base\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e50.8cm (20\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048710582507,"sku":"756120","price":769.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MT756120.jpg?v=1775557102"},{"product_id":"b756120","title":"Matthews 50.8cm (20\") C+ Stand with Turtle Base, Grip Head \u0026 Arm (Black)","description":"\u003cp\u003eThe 50.8cm (20\") C+ Stand is the short Matthews C-stand with the detachable spring loaded turtle base, here as a full kit with grip head and 50.8cm (20\") Hollywood arm in black. It is the stand for tight sets, low setups and small packages, where a 101.6cm (40\") riser would just get in the way.\u003c\/p\u003e\n\u003cp\u003ePull the riser out of the turtle base and the base becomes a low stand on its own, around 30cm (12\") high with a junior receiver for grip hardware and lighting. The legs nest with other C-stands, and the sliding lower leg levels the stand on stairs, kerbs and slopes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable spring loaded turtle base with a 2.86cm (1-1\/8\") junior receiver\u003c\/li\u003e\n\u003cli\u003eDetachable double riser with a junior pin at one end and a baby pin at the other\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e83.3cm (32.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6kg (13lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTurtle base mounting height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 30cm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eEmail sales@blkflag.com.au if you need the maximum working height confirmed before you order.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe riser, turtle base, grip head and arm are all sold separately as spares, and the turtle base takes any standard C+ riser or anything with a junior pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") C+ double riser\u003c\/li\u003e\n\u003cli\u003eSpring loaded turtle base\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e50.8cm (20\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048711336171,"sku":"B756120","price":769.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MTB756120.jpg?v=1775557165"},{"product_id":"755120","title":"Matthews 50.8cm (20\") C+ Stand with Turtle Base (Chrome)","description":"\u003cp\u003eThe 50.8cm (20\") C+ Stand with the detachable spring loaded turtle base, supplied as the stand only in chrome, so you can fit the grip head and arm you already run.\u003c\/p\u003e\n\u003cp\u003eThe turtle base comes off and works as a low stand on its own with a junior receiver, and the riser breaks down for compact storage and transport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable spring loaded turtle base with a 2.86cm (1-1\/8\") junior receiver\u003c\/li\u003e\n\u003cli\u003eDetachable double riser with a junior pin at one end and a baby pin at the other\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e83.3cm (32.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 50.8cm (20\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") C+ double riser\u003c\/li\u003e\n\u003cli\u003eSpring loaded turtle base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048711467243,"sku":"755120","price":379.95,"currency_code":"AUD","in_stock":true}]},{"product_id":"b755120","title":"Matthews 50.8cm (20\") C+ Stand with Turtle Base (Black)","description":"\u003cp\u003eThe 50.8cm (20\") C+ Stand with the detachable spring loaded turtle base, supplied as the stand only in black, so you can fit the grip head and arm you already run.\u003c\/p\u003e\n\u003cp\u003eThe turtle base comes off and works as a low stand on its own with a junior receiver, and the riser breaks down for compact storage and transport.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable spring loaded turtle base with a 2.86cm (1-1\/8\") junior receiver\u003c\/li\u003e\n\u003cli\u003eDetachable double riser with a junior pin at one end and a baby pin at the other\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e83.3cm (32.8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 50.8cm (20\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") C+ double riser\u003c\/li\u003e\n\u003cli\u003eSpring loaded turtle base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048711860459,"sku":"B755120","price":379.95,"currency_code":"AUD","in_stock":true}]},{"product_id":"756020","title":"Matthews 50.8cm (20\") Hollywood Century C-Stand with Sliding Leg, Grip Head \u0026 Arm (Chrome)","description":"\u003cp\u003eThe 50.8cm (20\") Hollywood Century C-Stand is the short version of the stand grips reach for first, supplied with grip head and 50.8cm (20\") Hollywood arm in chrome.\u003c\/p\u003e\n\u003cp\u003eThe sliding lower leg means you can level it on stairs, kerbs and slopes, and the staggered legs nest tight against other C-stands on a busy floor. At 50.8cm (20\") it gets under tables, into cars and into all the places a 101.6cm (40\") stand cannot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the Hollywood arm\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e171.5cm (67\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85.1cm (33.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4kg (8.25lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") Hollywood Century C-Stand with sliding leg\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e50.8cm (20\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048712220907,"sku":"756020","price":629.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MT756020.jpg?v=1775557097"},{"product_id":"b756020","title":"Matthews 50.8cm (20\") Hollywood Century C-Stand with Sliding Leg, Grip Head \u0026 Arm (Black)","description":"\u003cp\u003eThe 50.8cm (20\") Hollywood Century C-Stand is the short version of the stand grips reach for first, supplied with grip head and 50.8cm (20\") Hollywood arm in black.\u003c\/p\u003e\n\u003cp\u003eThe sliding lower leg means you can level it on stairs, kerbs and slopes, and the staggered legs nest tight against other C-stands on a busy floor. At 50.8cm (20\") it gets under tables, into cars and into all the places a 101.6cm (40\") stand cannot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the Hollywood arm\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e171.5cm (67\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85.1cm (33.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4kg (8.25lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") Hollywood Century C-Stand with sliding leg\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e50.8cm (20\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048712384747,"sku":"B756020","price":669.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MTB756020.jpg?v=1775557161"},{"product_id":"755020","title":"Matthews 50.8cm (20\") Hollywood Century C-Stand with Sliding Leg (Chrome)","description":"\u003cp\u003eThe 50.8cm (20\") Hollywood Century C-Stand is the short version of the stand grips reach for first, supplied as the stand only in chrome.\u003c\/p\u003e\n\u003cp\u003eThe sliding lower leg means you can level it on stairs, kerbs and slopes, and the staggered legs nest tight against other C-stands on a busy floor. At 50.8cm (20\") it gets under tables, into cars and into all the places a 101.6cm (40\") stand cannot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e171.5cm (67\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85.1cm (33.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eHeights are as published by Matthews for the kit version.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 50.8cm (20\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") Hollywood Century C-Stand with sliding leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048712712427,"sku":"755020","price":549.95,"currency_code":"AUD","in_stock":true}]},{"product_id":"b755020","title":"Matthews 50.8cm (20\") Hollywood Century C-Stand with Sliding Leg (Black)","description":"\u003cp\u003eThe 50.8cm (20\") Hollywood Century C-Stand is the short version of the stand grips reach for first, supplied as the stand only in black.\u003c\/p\u003e\n\u003cp\u003eThe sliding lower leg means you can level it on stairs, kerbs and slopes, and the staggered legs nest tight against other C-stands on a busy floor. At 50.8cm (20\") it gets under tables, into cars and into all the places a 101.6cm (40\") stand cannot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e171.5cm (67\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85.1cm (33.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eHeights are as published by Matthews for the kit version.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 50.8cm (20\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50.8cm (20\") Hollywood Century C-Stand with sliding leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048712974571,"sku":"B755020","price":549.95,"currency_code":"AUD","in_stock":true}]},{"product_id":"756040","title":"Matthews 101.6cm (40\") Hollywood C-Stand with Sliding Leg, Grip Head \u0026 Arm (Chrome)","description":"\u003cp\u003eThe 101.6cm (40\") Hollywood C-Stand is the industry standard C-stand, supplied as a full kit with grip head and 101.6cm (40\") Hollywood arm in chrome.\u003c\/p\u003e\n\u003cp\u003eFlags, nets, small fixtures, booms off the arm: this is the stand that does most of the work on a grip truck. The sliding lower leg levels it on stairs and slopes, and the staggered legs let a row of stands sit right up against each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e135cm (53.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2kg (16lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") Hollywood C-Stand with sliding leg\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e101.6cm (40\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048713728235,"sku":"756040","price":699.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MT756040.jpg?v=1775557099"},{"product_id":"b756040","title":"Matthews 101.6cm (40\") Hollywood C-Stand with Sliding Leg, Grip Head \u0026 Arm (Black)","description":"\u003cp\u003eThe 101.6cm (40\") Hollywood C-Stand is the industry standard C-stand, supplied as a full kit with grip head and 101.6cm (40\") Hollywood arm in black.\u003c\/p\u003e\n\u003cp\u003eFlags, nets, small fixtures, booms off the arm: this is the stand that does most of the work on a grip truck. The sliding lower leg levels it on stairs and slopes, and the staggered legs let a row of stands sit right up against each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e135cm (53.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2kg (16lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") Hollywood C-Stand with sliding leg\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e101.6cm (40\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048714186987,"sku":"B756040","price":699.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MTB756040.jpg?v=1775557163"},{"product_id":"755040","title":"Matthews 101.6cm (40\") Hollywood C-Stand with Sliding Leg (Chrome)","description":"\u003cp\u003eThe 101.6cm (40\") Hollywood C-Stand is the industry standard C-stand, supplied as the stand only in chrome.\u003c\/p\u003e\n\u003cp\u003eFlags, nets, small fixtures, booms off the arm: this is the stand that does most of the work on a grip truck. The sliding lower leg levels it on stairs and slopes, and the staggered legs let a row of stands sit right up against each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e135cm (53.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eHeights are as published by Matthews for the kit version.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 101.6cm (40\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") Hollywood C-Stand with sliding leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048714547435,"sku":"755040","price":549.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/image_8391fce0-372b-424b-bd90-79d60e1ba161.jpg?v=1786314942"},{"product_id":"b755040","title":"Matthews 101.6cm (40\") Hollywood C-Stand with Sliding Leg (Black)","description":"\u003cp\u003eThe 101.6cm (40\") Hollywood C-Stand is the industry standard C-stand, supplied as the stand only in black.\u003c\/p\u003e\n\u003cp\u003eFlags, nets, small fixtures, booms off the arm: this is the stand that does most of the work on a grip truck. The sliding lower leg levels it on stairs and slopes, and the staggered legs let a row of stands sit right up against each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eFolding, nesting base\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e135cm (53.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eHeights are as published by Matthews for the kit version.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 101.6cm (40\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") Hollywood C-Stand with sliding leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048714776811,"sku":"B755040","price":549.95,"currency_code":"AUD","in_stock":true}]},{"product_id":"339567","title":"Matthews 101.6cm (40\") Hollywood Pro C-Stand with Low Profile Sliding Leg, Grip Head \u0026 Arm (Chrome)","description":"\u003cp\u003eThe Hollywood Pro C-Stand is the low profile version of the Matthews 101.6cm (40\") C-stand, with legs that sit at 21.6cm (8.5\") instead of the standard 25.4cm (10\"). That extra clearance gets the base under set pieces, furniture and vehicles where a normal C-stand will not fit.\u003c\/p\u003e\n\u003cp\u003eIt keeps the sliding leg for levelling on stairs, kerbs and slopes, and comes as a full kit with grip head and arm. It opens easily, and takes a little more handling to close than the standard sliding leg model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow profile base, legs 21.6cm (8.5\") high\u003c\/li\u003e\n\u003cli\u003eSliding leg for uneven ground\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e134cm (53\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2kg (16lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLeg height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e21.6cm (8.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHollywood Pro 101.6cm (40\") C-Stand with low profile sliding leg\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e101.6cm (40\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048715333867,"sku":"339567","price":789.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MT339567.jpg?v=1775557018"},{"product_id":"756140","title":"Matthews 101.6cm (40\") C+ Stand with Turtle Base, Grip Head \u0026 Arm (Chrome)","description":"\u003cp\u003eThe 101.6cm (40\") C+ Stand pairs a full height C-stand with the detachable spring loaded turtle base, supplied with grip head and 101.6cm (40\") Hollywood arm in chrome.\u003c\/p\u003e\n\u003cp\u003eLift the riser out and the turtle base becomes a low stand with a junior receiver, around 30cm (12\") high, that takes standard grip hardware and lighting. The riser breaks down too, so a kit packs smaller than a one piece C-stand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable spring loaded turtle base with a 2.86cm (1-1\/8\") junior receiver\u003c\/li\u003e\n\u003cli\u003eDetachable double riser with a junior pin at one end and a baby pin at the other\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e135cm (53\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2kg (16lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTurtle base mounting height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 30cm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe turtle base takes any standard C+ riser or anything with a junior pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") C+ double riser\u003c\/li\u003e\n\u003cli\u003eSpring loaded turtle base\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e101.6cm (40\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048716087531,"sku":"756140","price":769.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MT756140.jpg?v=1775557104"},{"product_id":"b756140","title":"Matthews 101.6cm (40\") C+ Stand with Turtle Base, Grip Head \u0026 Arm (Black)","description":"\u003cp\u003eThe 101.6cm (40\") C+ Stand pairs a full height C-stand with the detachable spring loaded turtle base, supplied with grip head and 101.6cm (40\") Hollywood arm in black.\u003c\/p\u003e\n\u003cp\u003eLift the riser out and the turtle base becomes a low stand with a junior receiver, around 30cm (12\") high, that takes standard grip hardware and lighting. The riser breaks down too, so a kit packs smaller than a one piece C-stand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetachable spring loaded turtle base with a 2.86cm (1-1\/8\") junior receiver\u003c\/li\u003e\n\u003cli\u003eDetachable double riser with a junior pin at one end and a baby pin at the other\u003c\/li\u003e\n\u003cli\u003eSerrated gobo heads that bite and resist side roll\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003cli\u003eAluminium Magic Gasket so the grip head holds without slipping or sagging under load\u003c\/li\u003e\n\u003cli\u003eKnurled baby pin on the arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e135cm (53\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2kg (16lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFolded base length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54cm (21\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTurtle base mounting height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 30cm (12\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe turtle base takes any standard C+ riser or anything with a junior pin.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") C+ double riser\u003c\/li\u003e\n\u003cli\u003eSpring loaded turtle base\u003c\/li\u003e\n\u003cli\u003eHollywood grip head\u003c\/li\u003e\n\u003cli\u003e101.6cm (40\") Hollywood arm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048716546283,"sku":"B756140","price":769.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MTB756140.jpg?v=1775557168"},{"product_id":"339758","title":"Matthews 101.6cm (40\") C+ Stand with Removable Turtle Base (Chrome)","description":"\u003cp\u003eThe 101.6cm (40\") C+ Stand with the removable turtle base, supplied as the stand only in chrome. Fit the grip head and arm you already run, or use the turtle base on its own as a low stand.\u003c\/p\u003e\n\u003cp\u003eThe legs fold and nest like any C-stand, with a sliding lower leg for levelling on uneven ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable turtle base\u003c\/li\u003e\n\u003cli\u003eFolding, nesting legs with a sliding lower leg\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e134cm (53\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5kg (11lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 101.6cm (40\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") C+ riser\u003c\/li\u003e\n\u003cli\u003eTurtle base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048716906731,"sku":"339758","price":549.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MT339758.jpg?v=1775557023"},{"product_id":"b339758","title":"Matthews 101.6cm (40\") C+ Stand with Removable Turtle Base (Black)","description":"\u003cp\u003eThe 101.6cm (40\") C+ Stand with the removable turtle base, supplied as the stand only in black. Fit the grip head and arm you already run, or use the turtle base on its own as a low stand.\u003c\/p\u003e\n\u003cp\u003eThe legs fold and nest like any C-stand, with a sliding lower leg for levelling on uneven ground.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable turtle base\u003c\/li\u003e\n\u003cli\u003eFolding, nesting legs with a sliding lower leg\u003c\/li\u003e\n\u003cli\u003eStainless steel Helicoil inserts in the riser castings, so threads do not strip\u003c\/li\u003e\n\u003cli\u003eV-shaped brass brakes giving three points of contact on every riser\u003c\/li\u003e\n\u003cli\u003eT-handles that stay captive in the riser castings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.21m (10.5ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e134cm (53\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoad capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10kg (22lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5kg (11lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFootprint\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70cm (27.5\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePairs with the Matthews 101.6cm (40\") Hollywood Grip Head and Arm, sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e101.6cm (40\") C+ riser\u003c\/li\u003e\n\u003cli\u003eTurtle base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/matthews-c-stands\"\u003eMatthews C-stand range\u003c\/a\u003e or every \u003ca href=\"\/collections\/matthews\"\u003eMatthews product\u003c\/a\u003e, or email sales@blkflag.com.au and we will help you spec the right grip gear for the job.\u003c\/p\u003e","brand":"Matthews","offers":[{"title":"Default Title","offer_id":48048717857003,"sku":"B339758","price":549.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/MTB339758.jpg?v=1775557107"}],"url":"https:\/\/blkflag.com.au\/collections\/matthews-c-stands.oembed","provider":"Black Flag Distribution","version":"1.0","type":"link"}