{"product_id":"wooden-camera-d-box-ursa-mini-ursa-mini-pro-12k-v-mount-239500","title":"Wooden Camera D-Box® (URSA Mini, URSA Mini Pro \/ 12K, V-Mount)","description":"\u003cp\u003e\u003cstrong\u003eThis D-Box® is not compatible with the Blackmagic URSA Cine 12K \u0026amp; 17K\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eD-Box® (URSA Mini, URSA Mini Pro \/ 12K, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start\/stop, and hot swap capability to the Blackmagic URSA Mini Pro \/ 12K, EF Mount, PL Mount, and B4 Mount cameras. The D-Box attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run\/stop.\u003c\/p\u003e\n\u003cp\u003eConnectors on the D-Box are contoured inline with the URSA Mini body, streamlining port connections and cable management. The module also provides two 3-pin Fischer ports, allowing start\/stop with any ARRI standard trigger device.\u003c\/p\u003e\n\u003cp\u003eThe D-Box is equipped with a Mini 4-pin XLR DC Input and includes a Mini 4-pin XLR to Full 4-pin XLR pigtail cable allowing an \u003ca data-sku=\"231000\" href=\"\/products\/wooden-camera-15v-power-supply-4pin-xlr-female-231000\"\u003eAC power supply\u003c\/a\u003e or \u003ca data-sku=\"179200\" href=\"\/products\/wooden-camera-wc-v-mount-xlr-4-pin-179200\"\u003eexternal power plate\u003c\/a\u003e to be connected to power the camera and accessories during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. The OEM AC Power Supply provided with the URSA Mini Pro does not have a high enough amperage rating to power a D-Box with accessories or perform a Hot Swap from battery power to DC input. Wooden Camera offers a higher rated unit for these requirements: \u003ca href=\"\/products\/wooden-camera-15v-power-supply-4pin-xlr-female-231000\" target=\"_blank\"\u003e15V Power Supply (4-pin XLR Female)\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eOverview:\u003c\/u\u003e\u003cbr\u003eAuthentic IDX V-Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap may be obscured by the right side BNC connectors when in use. The camera receives an unfused connection to the power source and the D-Box connectors share a 7.5A fuse. When using D-Box battery modules it is important to know what amount of power your batteries are capable of providing. Most high-end cinema batteries can supply up to 10A with the URSA Mini camera generally consuming 3–4A in standard configuration. Although the remaining power is available from the D-Taps, 2-pin connectors, Fischers, etc., it is best to limit the power draw to 5A or less for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eD-Box Connections:\u003c\/u\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eD-Tap – 12V Unregulated\u003c\/li\u003e\n\u003cli\u003eUSB – 5V Regulated\u003c\/li\u003e\n\u003cli\u003e2-pin connector – 12V Unregulated\u003cbr\u003e- ARRI standard wiring\u003c\/li\u003e\n\u003cli\u003e2-pin connector – 12V Unregulated\u003cbr\u003e- ARRI standard wiring\u003c\/li\u003e\n\u003cli\u003e3-pin Fischer – 24V Regulated\u003cbr\u003e- Regulator built in to convert battery voltage to 24V\u003cbr\u003e- Maximum 2A continuous (3A surge) shared between the two 3-pin Fischers\u003cbr\u003e- ARRI standard start\/stop capabilities\u003c\/li\u003e\n\u003cli\u003e3-pin Fischer – 24V Regulated\u003cbr\u003e- Regulator built in to convert battery voltage to 24V\u003cbr\u003e- Maximum 2A continuous (3A surge) shared between the two 3-pin Fischers\u003cbr\u003e- ARRI standard start\/stop capabilities\u003c\/li\u003e\n\u003cli\u003eDC Input – 12–16V\u003cbr\u003e- DC input on the D-Box is a Mini 4-pin XLR but a pigtail cable is included to full-size 4-pin XLR\u003cbr\u003e- Priority is given to DC Input to preserve battery charge when both sources are connected\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cu\u003ePlease Note:\u003c\/u\u003e In addition to the digital or glass fuse governing the output panels of the D-Box, this product contains a secondary fuse for the D-Tap ports of the attached battery plate. This fuse is located in a fuse holder within the plate and replacements can be purchased here: F10A Fast Blow Fuse\u003c\/p\u003e","brand":"Wooden Camera","offers":[{"title":"Default Title","offer_id":50511537373419,"sku":"239500","price":1949.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/8239\/1531\/files\/239500-d-box-ursa-mini-v-mount-1-update1_e03fdaaf-d05c-4aee-a52a-b98bb4e12e03.png?v=1790130166","url":"https:\/\/blkflag.com.au\/products\/wooden-camera-d-box-ursa-mini-ursa-mini-pro-12k-v-mount-239500","provider":"Black Flag Distribution","version":"1.0","type":"link"}