Light Widow Horizon Monitor Mount Kit: Keep Your Monitor Level, Anywhere on the Rig

Last updated: 7 August 2026. Prices are in AUD and correct at the time of writing, check the linked product page for live pricing and stock.

The Light Widow Horizon Monitor Mount Kit positions a camera monitor above or beside the camera, adjusts with one hand, and keeps the monitor level automatically as you move it. It's a compact, modular mount built to solve a daily annoyance: repositioning a monitor and then having to re-level it every time.

What it does

The Horizon Kit mounts a monitor to your camera's top handle or accessory points and lets you place it in a range of positions, high for a low camera, off to the side for a gimbal or shoulder rig, while always keeping the screen level. Everything is quick to adjust and locks with one hand, so you can reframe the monitor without stopping the shot.

The Horizon arm and 3-axis mount

Two parts do the work. The Horizon Arm rotates through 16 quick-locking positions with a thumb lever, so you can swing the monitor where you need it and lock it solidly. The 3-Axis Monitor Mount then gives you pan, tilt and roll without loosening or tightening any knobs, you just move it and it holds. Together they make repositioning fast and repeatable, and the resistance stays consistent over time rather than working loose.

What's in the kit

Mounting and specs

The arm uses ARRI-standard 3/8" pin connections (male and female) at the camera end and a male 1/4"-20 at the monitor end, with Light Widow's own 3-Axis interface between them. Key figures (per Light Widow):

Monitor compatibility

The kit fits 5" and 7" monitors with a 1/4"-20 mount. Note that this version is not compatible with the SmallHD Indie 5 or Cine 5, it works with other 7" and 5" 1/4"-20 mount monitors. If in doubt about your specific monitor, check with us before ordering.

Who it's for

Operators and ACs who move a monitor between positions, tripod to shoulder to gimbal, and want it level and locked every time, without a pocket full of knobs. It's light enough to leave on the rig and fast enough to trust on the day.

Frequently asked questions

What is the Light Widow Horizon Monitor Mount Kit?

It's a compact, modular monitor mount that positions a camera monitor above or beside the camera and keeps it level automatically, with a 16-position Horizon arm and a knob-free 3-axis pan/tilt/roll mount that adjusts with one hand.

What size monitor does the Horizon Kit support?

It supports 5" and 7" monitors with a 1/4"-20 mount, up to 7 inches, and weighs 6.5 oz total.

What monitors are not compatible with the Horizon Kit?

This version is not compatible with the SmallHD Indie 5 or Cine 5. It works with other 7" and 5" monitors that use a 1/4"-20 mount.

How does the Horizon mount keep the monitor level?

The Horizon Arm rotates through 16 quick-locking positions while the geometry keeps the screen level, and the 3-axis mount lets you fine-tune pan, tilt and roll without touching any knobs.

How does it attach to the camera?

It uses ARRI-standard 3/8" pin connections at the camera end and a 1/4"-20 thread at the monitor end, and the kit includes an L-bracket and 3/8"-16 and 1/4"-20 hardware for common mounting points.

Where to buy in Australia

Black Flag Distribution is the official Australian distributor of the professional film, television and production brands featured in this guide. We supply an Australia-wide network of authorised retailers and stockists rather than selling direct to the public, so there is a local dealer who can help wherever you are. To check pricing and availability and to buy, use the Black Flag Distribution store finder to find an authorised retailer or stockist near you. Search our store finder to locate your nearest Australian stockist and purchase from an authorised dealer.