How to Choose an Anton Bauer Battery: Gold Mount vs V-Mount, 14V vs 26V, and Capacity

Last updated: 7 August 2026. Prices are in AUD and correct at the time of writing, check the linked product pages for live pricing and stock.

Choosing an Anton Bauer battery comes down to three decisions: the mount your camera uses, the voltage it needs, and how much capacity (watt-hours) you want. Get those three right and the rest is easy. Here's how to work through them. For the full range, see our complete Anton Bauer guide.

Step 1: choose your mount

Gold Mount (three-pin stud) and V-Mount (wedge) are the two standard interfaces. They're functionally similar, so the practical rule is simple: match whatever your camera plate and accessories already use, and standardise your whole kit on it so every battery fits every charger and bracket. If you shoot a high-draw camera like the ARRI Alexa 35, you'll want Gold Mount Plus (26V-capable) or B-Mount instead, see Step 2.

Step 2: choose your voltage, 14V or 26V

Most cameras run on 14.4V, and the Titon and Dionic XT lines cover them. But high-draw cinema cameras, the ARRI Alexa 35 is the headline example, need 26V. Here's why: a 14.4V battery powering a 200 W load has to push very high current (roughly 12 to 19 A), which creates heat and stresses the pack. A native 26V battery delivers the same power at about half the current (~7 to 10 A), running cooler and more efficiently. Anton Bauer's Dionic 26V batteries are native 26V (cells stacked in series), not 14.4V packs with a boost converter, which is why they sustain high power better. They come in Gold Mount Plus and B-Mount.

Step 3: choose your capacity (watt-hours)

Watt-hours (Wh) is your runtime. Estimate it by dividing the battery's Wh by your rig's power draw in watts, a 150 Wh battery on a 50 W setup runs about three hours. More Wh means longer runtime but more weight, so match capacity to the job.

Don't forget: airline travel limits

If you fly with your kit, watt-hours matter for a second reason. As a general guide under international (IATA) rules, lithium batteries up to 100 Wh can travel in carry-on with few restrictions; batteries between 100 Wh and 160 Wh are usually allowed only with airline approval and typically limited to two spares; and batteries over 160 Wh are generally not permitted on passenger aircraft. Spare batteries must go in carry-on, never checked. Rules vary by airline and change, always confirm with your carrier before you fly. This is why many travelling shooters standardise on sub-100 Wh batteries like the Titon 90 or Dionic XT 90.

Putting it together

Pick the mount your camera uses (or Gold Mount Plus / B-Mount for 26V cameras), confirm the voltage your camera needs, then choose capacity by balancing runtime against weight and airline limits. Standardise your batteries, chargers and plates on one mount and your whole kit stays interchangeable.

Frequently asked questions

Is Gold Mount or V-Mount better?

Neither is clearly better, they're functionally similar standards. Choose the one your camera plate and accessories already use and standardise your kit on it so everything is interchangeable.

Do I need a 26V battery?

Only if your camera calls for it. High-draw cinema cameras like the ARRI Alexa 35 need 26V; most other cameras run on 14.4V. Check your camera's power requirements before buying.

What is a native 26V battery versus a regulated one?

A native 26V battery stacks cells in series to deliver 26V directly, sustaining high power efficiently. A regulated 26V battery is a 14.4V pack with a boost converter and can typically supply only about half the current at 26V. Anton Bauer's Dionic 26V batteries are native.

How many watt-hours do I need?

Divide the battery's Wh by your rig's power draw in watts for a rough runtime. Match capacity to your shoot, and remember that batteries over 100 Wh face airline restrictions.

What is the biggest camera battery I can fly with?

As a general guide, batteries up to 100 Wh travel easily in carry-on, 100 to 160 Wh need airline approval (usually max two spares), and over 160 Wh is generally not allowed on passenger flights. Always confirm the current rules with your specific airline.

Where to buy in Australia

Black Flag Distribution is the official Australian distributor of the professional film, television and production brands featured in this guide. We supply an Australia-wide network of authorised retailers and stockists rather than selling direct to the public, so there is a local dealer who can help wherever you are. To check pricing and availability and to buy, use the Black Flag Distribution store finder to find an authorised retailer or stockist near you. Search our store finder to locate your nearest Australian stockist and purchase from an authorised dealer.